__________________________________________________________ The U.S. Department of Energy Computer Incident Advisory Center ___ __ __ _ ___ / | /_\ / \___ __|__ / \ \___ __________________________________________________________ INFORMATION BULLETIN Cisco Catalyst 5000 Series 802.1x Vulnerability April 18, 2001 18:00 GMT Number L-072 ______________________________________________________________________________ PROBLEM: An 802.1x frame received on a STP blocked port causes a network storm in the immediate network. PLATFORM: Cisco Catalyst 5000 series switches based on any of the following EARL (Encoded Address Recognition Logic) hardware revisions: * EARL 1 * EARL 1+ * EARL 1++ and running any of the following switch software revisions: * 4.5 (11) or earlier * 5.5 (6) or earlier * 6.1 (2) or earlier are affected by this vulnerability. This series includes the Catalyst models 5000, 5002, 5500, 5505, 5509, 2901, 2902 and 2926 switches. DAMAGE: The network storm can only be terminated when the source of the 802.1x frame is removed. A malicious party could exploit the vulnerability to perform a denial of service (DoS) against the switch. SOLUTION: Cisco recommends that all parties acquire the patch for this vulnerability, or use the workaround described in the advisory ______________________________________________________________________________ VULNERABILITY The risk is LOW. There has been no announced usage of this ASSESSMENT: vulnerability. ______________________________________________________________________________ [****** Begin Cisco Advisory ******] Cisco Security Advisory: Catalyst 5000 Series 802.1x Vulnerability ============================================================================= Revision 1.0 For Public Release 2001 April 16 at 1500 UTC ------------------------------------------------------------------------ Summary ======= When an 802.1x frame is received by an affected Catalyst 5000 series switch on a STP blocked port it is forwarded in that VLAN instead of being dropped. This causes a performance impacting 802.1x frames network storm in that part of the network, which is made up of the affected Catalyst 5000 series switches. This network storm only subsides when the source of the 802.1x frames is removed or one of the workarounds in the workaround section is applied. This vulnerability can be exploited to produce a denial of service (DoS) attack. This vulnerability is described in Cisco bug id CSCdt62732. This notice will be posted at http://www.cisco.com/warp/public/707/cat5k-8021x-vuln-pub.shtml Affected Products ================= Cisco Catalyst 5000 series switches based on any of the following EARL (Encoded Address Recognition Logic) hardware revisions: * EARL 1 * EARL 1+ * EARL 1++ and running any of the following switch software revisions: * 4.5 (11) or earlier * 5.5 (6) or earlier * 6.1 (2) or earlier are affected by this vulnerability. This series includes the Catalyst models 5000, 5002, 5500, 5505, 5509, 2901, 2902 and 2926 switches. To determine your hardware and software revision type sh mod on the console prompt of the switch. Products Not Affected ===================== Catalyst 5000 series switches based on EARL 2 or later hardware revisions are not affected by this vulnerability. Catalyst 5000 series switches regardless of the EARL hardware revision, running the following switch software revisions * 4.5 (12) or later - expected general availability before 2001, May 1 * 5.5 (7) or later * 6.1 (3) or later are not affected by this vulnerability. No other Cisco product is currently known to be affected by this vulnerability. This includes the Catalyst 6000, 4000, 3500XL, 2900XL and 2948G switches. Details ======= When an 802.1x (IEEE standard for port based network access control) frame is received by an affected Catalyst 5000 series switch on a STP (Spanning Tree Protocol) blocked port it is forwarded in that VLAN (Virtual Local Area Network) instead of being dropped. This causes a performance impacting 802.1x frames network storm in that part of the network, which is made up of the affected Catalyst 5000 series switches. This network storm only subsides when the source of the 802.1x frames is removed or one of the workarounds in the workaround section is applied. The vulnerability is documented as Cisco bug id CSCdt62732. Impact ====== When an affected Catalyst 5000 series switch network receives an 802.1x frame it causes an 802.1x frames network storm. This network storm degrades the performance of the network. Slower ports on the affected Catalyst 5000 series switches may stop passing user data. The affected Catalyst 5000 series switches may not respond to any management inquiries via SNMP, Telnet or HTTP. However, management via the console port on the switches is still possible and can be used to apply the workarounds. Software Versions and Fixes =========================== This vulnerability has been fixed in the following switch software revisions * 4.5 (12) or later - expected availability before 2001, May 1 * 5.5 (7) or later * 6.1 (3) or later and the fix will be carried forward in all future releases. Software upgrade can be performed via the console interface. Obtaining Fixed Software ======================== Cisco is offering free software upgrades to remedy this vulnerability for all affected customers. Customers with service contracts may upgrade to any software release. Customers may install only the feature sets they have purchased. Fixed software is currently available except where noted. Customers with contracts should obtain upgraded software through their regular update channels. For most customers, this means that upgrades should be obtained via Cisco's Software Center at http://www.cisco.com/. Customers without contracts or warranty should get their upgrades by contacting the Cisco Technical Assistance Center (TAC) as shown below: * (800) 553-2447 (toll-free in North America) * +1 408 526 7209 (toll call from anywhere in the world) * e-mail: tac@cisco.com See http://www.cisco.com/warp/public/687/Directory.shtml for additional TAC contact information, including instructions and e-mail addresses for use in various languages. Give the URL of this notice as evidence of your entitlement to a free upgrade. Free upgrades for non-contract customers must be requested through the TAC. Please do not contact either "psirt@cisco.com" or "security-alert@cisco.com" for software upgrades; faster results will be obtained by contacting the TAC directly. Workarounds =========== The following workarounds will prevent the 802.1x frames from causing an 802.1x frames network storm in an affected Catalyst 5000 series switch network. These workarounds can also be applied to a network experiencing an 802.1x frames network storm. 1. Configure permanent MAC address entries for the entire reserved STP range 01-80-c2-00-00-02 to 01-80-c2-00-00-0f to be directed out an unused port for each VLAN on each affected switch in the network. The commands to configure are given below. set cam permanent 01-80-c2-00-00-02 / set cam permanent 01-80-c2-00-00-03 / set cam permanent 01-80-c2-00-00-04 / set cam permanent 01-80-c2-00-00-05 / set cam permanent 01-80-c2-00-00-06 / set cam permanent 01-80-c2-00-00-07 / set cam permanent 01-80-c2-00-00-08 / set cam permanent 01-80-c2-00-00-09 / set cam permanent 01-80-c2-00-00-0a / set cam permanent 01-80-c2-00-00-0b / set cam permanent 01-80-c2-00-00-0c / set cam permanent 01-80-c2-00-00-0d / set cam permanent 01-80-c2-00-00-0e / set cam permanent 01-80-c2-00-00-0f / 2. Break the STP loop by either a) Disabling the redundant (STP blocked ports) or b) Disconnecting the cable from these ports Remove all the sources of 802.1x frames before re-enabling the ports or reconnecting the cables. 3. Power down the Catalyst 5000 switch(es) that create the spanning-tree loop (any switch with STP blocked ports). Remove all the sources of 802.1x frames before powering up the switches. Exploitation and Public Announcements ===================================== The Cisco PSIRT is not aware of any malicious use of the vulnerability described in this advisory. A customer who discovered this vulnerability while using Microsoft Windows XP BETA software reported this vulnerability to Cisco. Microsoft Windows XP attempts 802.1x authentication during its boot-up phase. Following these configuration steps for Microsoft Windows XP can disable this: 1. Click on the associated Local Area Connection under Network Connections 2. Click on the Authentication Tab at the top right. 3. Uncheck "Network Access Control using IEEE 802.1x" This issue has been discussed in news articles regarding issues with Microsoft Windows XP BETA program and the Cisco Catalyst 5000 series switches. Status of This Notice: FINAL ============================ This is a FINAL notice. Although Cisco cannot guarantee the accuracy of all statements in this notice, all of the facts have been checked to the best of our ability. Cisco does not anticipate issuing updated versions of this notice unless there is some material change in the facts. Should there be a significant change in the facts, Cisco may update this notice. Distribution ============ This notice will be posted on Cisco's Worldwide Web site at http://www.cisco.com/warp/public/707/cat5k-8021x-vuln-pub.shtml . In addition to Worldwide Web posting, a text version of this notice will be clear-signed with the Cisco PSIRT PGP key and will be posted to the following e-mail and Usenet news recipients: * cust-security-announce@cisco.com * bugtraq@securityfocus.com * firewalls@lists.gnac.com * first-teams@first.org (including CERT/CC) * cisco@spot.colorado.edu * cisco-nsp@puck.nether.net * comp.dcom.sys.cisco * Various internal Cisco mailing lists Future updates of this notice, if any, will be placed on Cisco's Worldwide Web server, but may or may not be actively announced on mailing lists or newsgroups. Users concerned about this problem are encouraged to check the URL given above for any updates. Revision History ================ Revision Number 1.0 Initial Public Release Cisco Security Procedures ========================= Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's Worldwide Web site at http://www.cisco.com/warp/public/707/sec_incident_response.shtml . This includes instructions for press inquiries regarding Cisco security notices. ------------------------------------------------------------------------ This notice is Copyright 2001 by Cisco Systems, Inc. This notice may be redistributed freely after the release date given at the top of the text, provided that redistributed copies are complete and unmodified, and include all date and version information. ------------------------------------------------------------------------ [****** End Cisco Advisory ******] _______________________________________________________________________________ CIAC wishes to acknowledge the contributions of Cisco Systems Inc. for the information contained in this bulletin. _______________________________________________________________________________ CIAC, the Computer Incident Advisory Capability, is the computer security incident response team for the U.S. Department of Energy (DOE) and the emergency backup response team for the National Institutes of Health (NIH). CIAC is located at the Lawrence Livermore National Laboratory in Livermore, California. CIAC is also a founding member of FIRST, the Forum of Incident Response and Security Teams, a global organization established to foster cooperation and coordination among computer security teams worldwide. CIAC services are available to DOE, DOE contractors, and the NIH. CIAC can be contacted at: Voice: +1 925-422-8193 (7x24) FAX: +1 925-423-8002 STU-III: +1 925-423-2604 E-mail: ciac@ciac.org Previous CIAC notices, anti-virus software, and other information are available from the CIAC Computer Security Archive. World Wide Web: http://www.ciac.org/ (or http://ciac.llnl.gov -- they're the same machine) Anonymous FTP: ftp.ciac.org (or ciac.llnl.gov -- they're the same machine) PLEASE NOTE: Many users outside of the DOE, ESnet, and NIH computing communities receive CIAC bulletins. If you are not part of these communities, please contact your agency's response team to report incidents. Your agency's team will coordinate with CIAC. The Forum of Incident Response and Security Teams (FIRST) is a world-wide organization. A list of FIRST member organizations and their constituencies can be obtained via WWW at http://www.first.org/. This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation or favoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or the University of California, and shall not be used for advertising or product endorsement purposes. LAST 10 CIAC BULLETINS ISSUED (Previous bulletins available from CIAC) L-062: Erroneous Verisign-Issued Digital Certificates for Microsoft L-063: RedHat Linux Log Code Buffer Overflow/Unguarded Browser Call l-064: The Lion Internet Worm DDOS Risk L-065: Solaris Exploitation of snmpXdmid L-066: Internet Explorer MIME Mime Header Vulnerability L-067: Linux worm Adore L-068: Cisco VPN3000 Concentrator TELNET Vulnerability L-069: Cisco Content Services Switch User Account Vulnerability L-070: FTP Filename Expansion Vulnerability L-071: Various Vendors' Network Time Protocol (NTP) Vulnerability